Description
Powerful diesel heater with integrated heating elements
Combi D 6 E is similar to Combi D 6, the only difference being the integrated electric heating elements. The diesel version is equipped with a high-quality burner. Therefore, it also heats reliably while driving.
At the camp site, simply switch over to electrical mode and run the heater with the 230V power supply, with no need for the vehicle battery. Depending on the required output, choose between diesel, electric or mixed mode: in milder weather, set the appliance to electrical mode, on colder days to diesel mode and in extremely cold weather use mixed mode – diesel and electric heating. Through four air outlets, the warm air flows into the vehicle where it is distributed optimally.
The powerful Combi D 6 E heats larger motor homes within a short time. The appliance also has a 10-litre water tank, which is heated at the same time when hot water is required. This means that you do not need an additional water heater, which saves space and weight. The Combi heater is also very compact and offers many different installation options.
- Simple operation with the digital CP plus iNet ready control panel
- Automatic climate control possible in combination with a Truma air conditioner
- With integrated heating elements for additional electrical mode
- Powerful fan and even distribution of warm air
- Uses little energy
- Especially lightweight and compact; can be installed in various positions to save space
Technical
- Dimensions (L x W x H) 525 x 450 x 300 mm
- Installation dimensions (L x W x H) 540 x 500 x 350mm*
- Unit Weight (without water) 16.9kg
- Heating time (from 15°C to 60°C) (Water only) Approx. 20min.
- Heating time (from 15°C to 60°C) (Heater + Water) Approx. 80min.
- Rated thermal output in Watts (Diesel) Upto 6000
- Rated thermal output in Watts (Electric) 1800
- Rated thermal output in Watts (Diesel & Electric Comb.) 5800
- Fuel consumption 220 – 630ml/h
- Water capacity 10 litres
- Air flow rate 287 m3/h
- Power consumption (at 230V) 3.9A / 7.8A
- Power consumption (at 12V) Heating up boiler 1.8A up to temp max. of 4.0A
- Water pressure Max. 2.8 Bar
Supplied with iNet control panel, exhaust ducting, black cowl, jg water fittings and 6m data cable.
** internal ducting, fittings and outlets sold separately**